The PhET Molecule Shapes lab turns VSEPR theory from a chart students memorize into something they can see and rotate. Students add bonds and lone pairs to a central atom and watch the molecule rearrange itself in 3D, with bond angles and geometry names updating as they go. In one class period, most students can explain why water is bent and carbon dioxide is linear, not just recite it.
Molecule Shapes is a free simulation from the PhET Interactive Simulations project at the University of Colorado Boulder and runs in any modern browser, including Chromebooks. This guide gives you a 50-minute PhET Molecule Shapes lab procedure, a data table, discussion questions, an exit ticket and tips for avoiding the most common VSEPR misconceptions.
In this guide9 sections
What the simulation includes
The full Molecule Shapes simulation has two screens:
- Model: students start with a central atom and add single, double or triple bonds and lone pairs. They can drag the molecule to rotate it, turn on bond angles, and show the names of both the molecule geometry and the electron geometry.
- Real Molecules: students choose actual molecules, such as water, ammonia, methane and carbon dioxide, and compare the idealized model with the real molecule, including the slightly smaller angles caused by lone pairs.
PhET also offers Molecule Shapes: Basics, a simpler version with fewer options. It works well for middle school physical science or as a warm-up for students who have not yet learned Lewis structures.
Learning goals
By the end of the lab, students should be able to:
- Explain that electron domains (bonds and lone pairs) around a central atom repel each other and spread out as far as possible.
- Predict the electron geometry and molecule geometry from the number of bonding domains and lone pairs.
- Explain why lone pairs compress bond angles (for example, 109.5° in methane vs about 104.5° in water).
- Recognize that a double or triple bond counts as one electron domain when predicting shape.
These goals fit naturally after Lewis structures and before polarity and intermolecular forces. If your students need a refresher on atomic structure first, our PhET Build an Atom lab is a good lead-in.
PhET Molecule Shapes lab procedure (about 50 minutes)
Part 1: Free exploration (8 minutes)
Open the Model screen. Give students one instruction: “Find out what happens to the shape when you add things to the central atom.” Let them click freely. Then ask two or three students to share one observation each. You will usually hear “the bonds spread out” and “lone pairs push the bonds closer together,” which sets up everything that follows.
Part 2: Single bonds only (12 minutes)
Students remove everything, then add single bonds one at a time, from two up to six. For each count they turn on Show Bond Angles and record the geometry name and angle in the data table below. Prompt: “Why do you think the bonds never bunch up on one side?”
Part 3: Add lone pairs (12 minutes)
Students build four electron domains in three ways: 4 bonds + 0 lone pairs, 3 bonds + 1 lone pair, 2 bonds + 2 lone pairs. They switch between the molecule geometry and electron geometry names and record what changes. Key discovery: the electron geometry stays tetrahedral, but the molecule geometry changes because we only “see” the atoms, not the lone pairs.
Part 4: Multiple bonds (6 minutes)
Students build two double bonds on a central atom and compare it with two single bonds. Both are linear. Ask: “Does a double bond count as one domain or two?” This short test prevents one of the most common mistakes on unit tests.
Part 5: Real molecules (12 minutes)
Switch to the Real Molecules screen. Students look up water, ammonia, methane and carbon dioxide, predict each shape before opening it, then check. They compare the real bond angles with the model angles and write one sentence explaining the difference.
Data table for students
Copy this table into your handout or slides. The answer key values are the standard VSEPR geometries.
| Bonding domains | Lone pairs | Electron geometry | Molecule geometry | Ideal bond angle | Example |
|---|---|---|---|---|---|
| 2 | 0 | Linear | Linear | 180° | CO2 |
| 3 | 0 | Trigonal planar | Trigonal planar | 120° | BF3 |
| 2 | 1 | Trigonal planar | Bent | Less than 120° | SO2 |
| 4 | 0 | Tetrahedral | Tetrahedral | 109.5° | CH4 |
| 3 | 1 | Tetrahedral | Trigonal pyramidal | About 107° | NH3 |
| 2 | 2 | Tetrahedral | Bent | About 104.5° | H2O |
| 5 | 0 | Trigonal bipyramidal | Trigonal bipyramidal | 90° and 120° | PCl5 |
| 6 | 0 | Octahedral | Octahedral | 90° | SF6 |
For honors or AP-level classes, extend the table with seesaw, T-shaped, square pyramidal and square planar shapes, which students can build on the Model screen by adding lone pairs to five and six domains.
Discussion questions
- Why do electron domains spread out as far as possible around the central atom?
- Methane and water both have four electron domains. Why is one tetrahedral and the other bent?
- What evidence from the simulation shows that lone pairs take up more space than bonding pairs?
- Why is CO2 linear even though it has two double bonds?
- If you only knew a molecule’s Lewis structure, what steps would you follow to predict its shape?
Run these as a think-pair-share so every student explains at least one answer out loud before the whole-class discussion.
Exit ticket
Give students three minutes to answer on a sticky note or form:
- “Ammonia (NH3) has three bonds and one lone pair. Name its electron geometry and molecule geometry, and explain why its bond angle is smaller than 109.5°.”
Sort answers into three piles: correct with reasoning, correct names but no reasoning, and confused. Start the next lesson with the second pile. More quick-check formats are in our exit ticket ideas.
Teacher tips and common misconceptions
- “Lone pairs don’t matter because you can’t see them.” Have students toggle lone pairs on and off in the sim. The shape changes even though the number of atoms stays the same.
- Counting double bonds as two domains. Part 4 exists for this reason. Revisit it with a quick whiteboard check: “How many domains does carbon have in CO2?”
- Drawing everything flat. Encourage students to rotate each molecule before recording it. Ask them to describe which bonds point “toward” and “away from” them.
- Mixing up the two geometry names. Have students write both names for every row, even when they are the same.
- Pacing. If you have only 30 minutes, skip Part 1 and assign Part 5 as homework.
Molecule Shapes pairs well with our Build a Molecule PhET lab earlier in the unit and the PhET Balancing Chemical Equations lab afterwards. You can find all our lab guides on the classroom simulations page.
Frequently asked questions
Is PhET Molecule Shapes free?
Yes. Molecule Shapes is free to use online from the PhET website, with no account required for students. Teachers can also find classroom activities shared by other educators on the PhET site.
What grade level is the Molecule Shapes simulation for?
The full version suits high school chemistry, honors and AP Chemistry, and intro college courses. Molecule Shapes: Basics works for middle school or for students who have not yet studied Lewis structures.
How long does the PhET Molecule Shapes lab take?
The procedure above takes about 50 minutes. A shortened version (Parts 2, 3 and 5) fits in 30 to 35 minutes.
Does the simulation teach VSEPR theory on its own?
It shows the results of VSEPR clearly, but students learn more when you add prediction steps and discussion. Ask students to predict each shape before they build it, then explain any surprises.
Wrap-up
The PhET Molecule Shapes lab works because students build the idea themselves: domains repel, lone pairs push harder, and shape follows from both. Use the data table as a reference sheet for the rest of the unit, and come back to the Real Molecules screen when you teach polarity. A few minutes of rotating molecules on screen will save you a lot of reteaching later.
